The technical requirements for cargo shower room mainly include the following aspects:
Filter system: The cargo shower room should be equipped with an efficient filtering system, usually including a primary filter and a high-efficiency filter. The primary filter is used to filter larger dust particles, while the high-efficiency filter is used to filter smaller particles to ensure that dust and other impurities can be effectively removed during showering.
Wind speed control: The wind speed in the cargo shower room should be kept within a certain range, usually 18-22 m/s. Too low wind speed will affect the dust removal effect, and too high wind speed may damage the equipment.
Sealing performance: The cargo shower room should have good sealing performance to prevent external pollutants from entering. The two doors are electronically interlocked to ensure that unpurified air does not enter the clean room.
Electrical system: The electrical system of the cargo shower room should be regularly inspected to ensure normal operation. If there is a fault, it can be repaired according to the electrical schematic diagram.
Safety device: The cargo shower room should be equipped with safety protection devices, such as emergency stop switches and infrared sensors, to ensure the safety of staff.
Maintenance: Clean or replace filters regularly, check wind speed and electrical systems to ensure that the equipment is in optimal working condition. Use a dust particle counter to regularly test cleanliness to ensure that it meets the standards.
Use environment: The use environment of the cargo shower room should be kept dry, the temperature should not exceed 50℃, and open flames are strictly prohibited.
